Malarkey vs. GAF Shingles in Oklahoma | S1R
OK Roofing Reg. #80007107·Malarkey Certified Pro Contractor

Guides ›

Homeowner guide · by Eric L. Scott, owner

Malarkey vs. GAF shingles: which is better for an Oklahoma roof?

Short answer: both are good brands, but for Oklahoma hail, wind and heat swings, Eric recommends Malarkey rubberized asphalt shingles. The Vista AR line is Class 4 impact rated, the rubber keeps the shingle flexible in heat and cold, and a Class 4 roof may qualify you for an insurance premium discount. The exact product line matters more than the logo.

Watch: Eric on why he uses Malarkey

Eric on why he uses Malarkey (53 sec). Watch on YouTube

Last updated:

Compare two named products, not two logos

Start by asking which Malarkey shingle and which GAF shingle are actually under consideration. Write both names on the estimate. Then compare the attributes that matter to your house: impact rating, appearance, installed roof details and the warranty being offered. A conversation that stays at brand level can miss the biggest differences within each manufacturer's own range.

The table below is a starting point, not a substitute for the current product documents. If you are comparing Vista AR with a GAF product, ask the roofer to identify the exact GAF line rather than writing Timberline alone. Product names and specifications deserve the same care as the total price. You should know what is being delivered before the materials arrive at the property.

Rubber modification and impact class answer different questions

Is rubberized asphalt the same thing as a Class 4 rating?

No. Rubberized asphalt describes the material approach; Class 4 is an impact rating for a particular product. Confirm both the material and the rating of the exact line being quoted.

What should I do if my HOA requires a specific shingle?

Confirm the approved product and color before ordering, then ask for the estimate to identify that selection. Discuss any required change with the roofer before approving materials.

Does a Class 4 roof mean I can skip an inspection after hail?

No. An impact rating is not a promise that a storm cannot damage the roof. Have new leaks or suspected storm damage assessed rather than assuming the rating rules out a problem.

Rubberized asphalt describes the material approach Eric prefers. An impact class describes a product's stated rating. Those are related parts of the buying discussion, but they are not interchangeable labels. Do not assume every product under one brand has the same class. The existing comparison on this page identifies Highlander AR as Class 3 and Vista AR as Class 4.

Likewise, a GAF name does not automatically mean the shingle lacks an impact-rated option. This guide identifies Timberline AS II as an impact-rated line and distinguishes it from standard Timberline HDZ. Ask for the current product documentation for the line on your proposal. That gives you a specific item to discuss with both the installer and your insurance agent, instead of relying on a broad brand reputation.

Impact resistance is not a storm-proof promise

Class 4 can be an important reason to choose a shingle in Oklahoma. It should not be read as a promise that no hailstorm can damage the finished roof. A roof has more parts than the exposed shingle surface. Ask how the proposal addresses the whole assembly and what to do if a later storm causes a leak or visible damage.

Separate impact resistance from wind and algae questions too. A product can have more than one performance feature, and a short sales phrase does not explain all of them. Ask the roofer to show you where each relevant claim appears in the manufacturer's information. You do not need to memorize a specification sheet. You do need to know which claims describe your selected product.

Match the house as well as the specification

If an HOA controls roof appearance, resolve the permitted product and color before ordering. If you are matching an addition to an existing GAF roof, take that requirement into the comparison early. Choosing only by impact rating can leave a separate appearance question unanswered. Eric's recommendation can be part of the decision without ignoring a real constraint at your property.

Ask to review the proposed color and product together. A color name alone does not tell you the impact class or the roof system being quoted. Keep any HOA response with the estimate. If a required product changes, ask for a revised proposal so the material name, cost and warranty discussion all refer to the same selection. Do not rely on an earlier conversation about a different shingle.

Installation details belong beside the shingle choice

The roof's underlayment, flashing and ventilation are not decided by the brand logo alone. Have the installer explain those parts of the plan. Ask what is included around existing roof penetrations and how the condition below the old shingles will be checked. A premium product name is not an answer to a question about work elsewhere on the roof.

When bids use different products, first identify whether the installation scopes also differ. Otherwise you may credit a price difference entirely to the shingles when it reflects different work. Keep the comparison in two columns: the named product and the planned installation. That simple separation makes it easier to ask useful follow-up questions and avoids turning a whole-roof decision into a contest between labels.

Compare warranty documents, not just years

Ask which warranty applies to the proposed job and what is required for it. Manufacturer coverage and workmanship coverage address different subjects. A long number in a sales conversation is not the complete agreement. Ask about eligibility, registration, transfer rules and exclusions in the documents for the actual roof, rather than assuming a warranty applies to every property.

This matters if you are comparing a primary residence with another type of property. Do not carry a warranty statement from one job into another without checking it. If two proposals mention different coverage, ask each contractor to explain the difference in writing. Keep the documents with your estimate so the decision is based on the coverage being offered, not just the most memorable number.

Give your insurance agent a product name

If a premium reduction is part of your reason for upgrading, ask your carrier about the exact line you are considering. Saying Malarkey, GAF or architectural shingle may not answer the carrier's question. Ask what proof it needs after installation. The final decision about a premium reduction belongs to the insurer, not to the shingle salesperson or the roofing contractor.

Eric supplies the Insurance Premium Reduction Request Form with the final invoice for a Malarkey Class 4 roof. Keep that step separate from choosing a material you want on the house. A possible discount can support the decision, but it is not guaranteed money. Choose with a clear view of the quoted product, the installed scope and the written coverage first.

Frequently asked questions: choosing between shingle lines

Malarkey vs. GAF at a glance

Malarkey (AR line)GAF
Shingle typeRubberized (polymer-modified) asphalt across the AR lineMostly standard asphalt; polymer-modified on select impact lines
Impact ratingVista AR: Class 4 · Highlander AR: Class 3Timberline AS II: Class 4 · Timberline HDZ: not sold as Class 4
Algae resistanceBuilt into the AR lineAvailable on many lines
Recycled contentUses recycled rubber and plastics in the shingleVaries by product
Made / distributedDistributed in OklahomaNationwide, the largest U.S. shingle maker
Who installs it hereScott 1 Roofing, Malarkey Certified Pro #5702Many Tulsa-area contractors

Ratings and product details come from each manufacturer and can change. Confirm the exact product line on your written estimate.

Why the brand name isn't the whole answer

"GAF" or "Malarkey" on a quote doesn't tell you much. Each company sells several product lines with different impact ratings, warranties and prices. Two GAF roofs can perform very differently, and so can two Malarkey roofs. Ask your estimate to name the manufacturer and the product line.

Why Oklahoma roofs are hard on shingles

Oklahoma gets large hail, straight-line wind and summer-to-winter temperature swings. Standard asphalt gets brittle as it ages and bakes, so it cracks and loses granules when hail hits. Rubber-modified asphalt stays flexible, so it is better at taking a hit without cracking.

Why Eric chose Malarkey

When GAF can make sense

If your HOA requires a specific GAF color, or you are matching an addition to an existing GAF roof, a GAF product may be the right call. Just make sure an impact-rated line is quoted if hail protection or an insurance discount matters to you.

Class 4 and your insurance premium

Many insurers offer a discount on Class 4 impact-rated roofs. Eric gives you the Insurance Premium Reduction Request Form with your final invoice, and your insurer decides the amount. More in our Malarkey Class 4 & insurance premium guide.

5 questions to ask any roofer before you sign

  1. What manufacturer and exact product line are you quoting?
  2. What is the impact rating of that product?
  3. Are you certified by that manufacturer, and which warranty can you register?
  4. What underlayment, flashing and ventilation are included?
  5. What could cost extra once the old roof is off? (See what costs extra on a new roof.)

Malarkey vs. GAF questions

Is Malarkey better than GAF?

Both are quality manufacturers. For Oklahoma hail, wind and heat, Eric Scott recommends Malarkey rubberized asphalt shingles because the rubber-modified asphalt stays flexible and Malarkey's Vista AR line is Class 4 impact rated. GAF makes good shingles too; what matters most is the exact product line and the crew installing it.

Does GAF make a Class 4 shingle?

Yes. GAF sells impact-rated lines such as Timberline AS II, and its standard Timberline HDZ is not sold as a Class 4 product. Always ask your estimate to name the exact product line, not just the brand.

What does AR mean on Malarkey shingles?

AR stands for Advanced Resistance: impact resistant, wind resistant and algae resistant. Malarkey Highlander AR is Class 3 and Vista AR is Class 4.

Will a Class 4 shingle lower my insurance premium?

It may. Many Oklahoma insurers offer a discount for Class 4 impact-rated roofs. Eric gives you an Insurance Premium Reduction Request Form with your final invoice; your insurer decides the discount.

Is Malarkey more expensive than GAF?

Not necessarily. As a Malarkey Certified Pro, Scott 1 Roofing can price a Class 4 rubberized asphalt shingle about where many companies price a Class 3 shingle. Every roof is quoted after a free inspection.

Does Scott 1 Roofing install GAF?

Scott 1 Roofing specializes in Malarkey and also installs other shingle, metal and tile roofs. Ask Eric during your free inspection and he will walk you through the options side by side.

Book a free roof inspection

Related: Rubberized asphalt vs. standard asphalt · Rubberized asphalt shingles · Class 4 impact-resistant roofing · Roof replacement · Roof replacement cost guide

Malarkey roof installs in Sapulpa · Bixby · Tulsa · Broken Arrow · Jenks · Glenpool · Owasso · Sand Springs and across Oklahoma.

Free inspection

Get Eric on your roof.

Call, text or send the form. You will hear back from Scott 1 Roofing, not a call center.

(539) 432-1383

Hours: Open 24 hours Monday–Saturday; closed Sunday. For a roofing emergency, call to confirm availability.

By submitting you agree to be contacted by Scott 1 Roofing about your request. No spam, no selling your info.